What is the flow rate and estimated hp for these turbos? Anyone running one?

 

From what I can find, its 435 CFM at 14.7 PSI. Should be good for 260ish maybe, depending on the dyno.

 

460 CFM at 18.0 psi. I have a buddy that's making 290awhp/260awt w/ the vf-30, STI Pinks, Ebay tmic, prodrive 3-port boost solenoid, and the obvious other stuff.

 

I've trapped as high as 107mph in the 1/4 with a VF30. Logs show around 265 g/s at peak flow. FWIW: not much different than a VF34/39 (or small TD06-16G)

 

1.96
8.457 @ 84.26
13.088 @ 106.99

Could of been better as I had lots of susension movement and a shytty SPEC S2 clutch.
New coilovers and clutch are getting me in the high 1.8's last time out. Airflow restriction kept my traps down considerably though. Fixed now...ready for the next time.

 

12 second wagon family van FTW!!!

 

true story

 

Then while looking through the rear window they see the groceries,baby seat, "My kid was student of the month" sticker, and soccerball decal!!!! Then they decide to kill themselves or trade in their car.