Shop in Tampa that does installs (turbo etc ...)
Guest
Posts: n/a
Originally Posted by BrewPuBeaver
what is the size of the compressor housing? i just spent some time doing a search on the Precision turbo PT67 and it being on a subie. who`s kit is it? there are 3 differant companies that make the same turbo... and one of them only made em for a while and they have a record for breaking above 26psi...
well i have seen a GT40r with a twin sroll 37r hot side on c16* with the filter off make 600whp on a really lean tune...
i really doubt that this turbo is good for another 100whp... but it is just a number, trap speeds are what matters
well i have seen a GT40r with a twin sroll 37r hot side on c16* with the filter off make 600whp on a really lean tune...
i really doubt that this turbo is good for another 100whp... but it is just a number, trap speeds are what matters
it still comes down to mass of air the turbo can flow.... yea meth, and spray will help....
but i was saying straight bost. also, spray will make a suby motor`s shelf life like 300 times less what it should be.
but i was saying straight bost. also, spray will make a suby motor`s shelf life like 300 times less what it should be.
__________________
You would have to ask Boosted for the specs....dont remember them. If memory serves me correctly, I think SS is going to install meth and Alex will eventually tune for c16.....unless he has changed his plans.......I just found out today he considered selling it....plans change, believe me I know.....
Dave, I assume everything is all fixed. Are you happy in that region? With some of the roads that are out there, I can only imagine a nice twisty on an early morning....*sigh* I really miss those country roads....and snow driving!
Craig
Dave, I assume everything is all fixed. Are you happy in that region? With some of the roads that are out there, I can only imagine a nice twisty on an early morning....*sigh* I really miss those country roads....and snow driving!
Craig
__________________
3.3l H-6 GC8 Impreza up and running!!!!!
3.3l H-6 GC8 Impreza up and running!!!!!
As for trap speeds, I dont think the tranny he has would take a launch. V.6 with cryo frozen RAs.... if the tranny does hold...CV, R160.......alot of stress. I think I read somewhere that a stock STi tranny would take a 9 sec pass....true?
__________________
3.3l H-6 GC8 Impreza up and running!!!!!
3.3l H-6 GC8 Impreza up and running!!!!!
Originally Posted by CueAuto
You would have to ask Boosted for the specs....dont remember them. If memory serves me correctly, I think SS is going to install meth and Alex will eventually tune for c16.....unless he has changed his plans.......I just found out today he considered selling it....plans change, believe me I know.....
fuck meth ... its to inconsistent do c16 ...


