Subaru Tech All We'll Drive

Need Help!

Thread Tools
 
Old Nov 8, 2005 | 05:23 PM
  #1 (permalink)  
byerly0137's Avatar
Thread Starter
Registered User
 
Joined: Oct 2005
Posts: 273
Likes: 0
Default Need Help!

Does anybody know of a place that puts springs on for cheap? The reason i am asking is because the place near me says 350 for install with a 4 wheel alignment. Is that a good deal? I think it is a little to pricey. I would like to get it done around where i live which is bradenton. Any feedback is appreciated!

Also, any place where i can get a camber kit(if needed, i have tein s tech's)

Last edited by byerly0137; Nov 8, 2005 at 05:25 PM.
Reply
Old Nov 8, 2005 | 06:57 PM
  #2 (permalink)  
DubtecV2's Avatar
...in da hause!!!
 
Joined: Apr 2005
Posts: 2,021
Likes: 0
Default

Check with Craig at ...CUE>> (in sig).
__________________

Reply
Old Nov 9, 2005 | 03:19 AM
  #4 (permalink)  
byerly0137's Avatar
Thread Starter
Registered User
 
Joined: Oct 2005
Posts: 273
Likes: 0
Default

cue is to far from me, its a little over an hour. If that is the only place you guys go to then i guess i will have to settle with that, but i would rather go somewhere closer.
Reply
Old Nov 9, 2005 | 04:11 AM
  #5 (permalink)  
BrewPuBeaver's Avatar
*Big Schpellar*
 
Joined: Jul 2005
Posts: 3,192
Likes: 0
Default

springs are pretty easy if you have some sort of mech. mind set....
__________________
Reply
Old Nov 9, 2005 | 07:48 AM
  #6 (permalink)  
byerly0137's Avatar
Thread Starter
Registered User
 
Joined: Oct 2005
Posts: 273
Likes: 0
Default

I would like to do them myself, but i have no clue of where to start when putting them on or even taking the old ones off. Would any place like tire kingdom put them on?
Reply
Old Nov 9, 2005 | 08:03 AM
  #7 (permalink)  
DubtecV2's Avatar
...in da hause!!!
 
Joined: Apr 2005
Posts: 2,021
Likes: 0
Default

Highly doubt run-of-the-mill tire shops would install aftermarket springs.

Cue is a bit far, but you won't be disappointed if you decide to go there.
__________________

Reply
Old Nov 9, 2005 | 08:12 AM
  #8 (permalink)  
esemes's Avatar
TTwins are my fav
 
Joined: Nov 2004
Posts: 895
Likes: 0
Default

Originally Posted by FUtec2k
Highly doubt run-of-the-mill tire shops would install aftermarket springs.

Cue is a bit far, but you won't be disappointed if you decide to go there.

+1

they did my teins.

very metaculous (sp?) and craig was very accomidating (sp?).....

i dont recommend many shops, period.

(there are several on the boards that d have the ability to do the job, but im not one of them.,......)
__________________

www.gsxRpaddock.com <---gsxR research, solutions, & support
www.iWSTi.com <---STi research, solutions, & support
www.TOPSPEEDsales.com <---STi premier tuning and performance
Reply
Old Nov 9, 2005 | 08:51 AM
  #9 (permalink)  
BrewPuBeaver's Avatar
*Big Schpellar*
 
Joined: Jul 2005
Posts: 3,192
Likes: 0
Default

why dont you come out on Saturday and we can knock em out...
__________________
Reply
Old Nov 9, 2005 | 12:28 PM
  #10 (permalink)  
byerly0137's Avatar
Thread Starter
Registered User
 
Joined: Oct 2005
Posts: 273
Likes: 0
Default

Where too? Also, i just bought a camber kit (SPC), is that a good company?
Reply




All times are GMT -8. The time now is 06:41 AM.