Subaru Tech All We'll Drive

LGT on the dyno

Thread Tools
 
Old Aug 23, 2005 | 11:25 AM
  #1 (permalink)  
redscooby's Avatar
Thread Starter
It's slow now
 
Joined: Nov 2004
Posts: 221
Likes: 0
Default LGT on the dyno

Just wanted to let everyone know I am taking the Legacy to Mastro this Thursday at 1pm. I am not getting tuned, just getting some dyno runs in case anyone wants to come and check it out. I want to know what this thing puts down. Ill post the results.

Thanks,
Eric
__________________
05 Legacy 2.5GT Un-Limited
Reply
Old Aug 23, 2005 | 11:35 AM
  #2 (permalink)  
mantra1's Avatar
Shaggin' Wagon IV
 
Joined: Jan 2004
Posts: 1,390
Likes: 0
Default

Awesome. Any guesstimates?
Reply
Old Aug 23, 2005 | 11:37 AM
  #3 (permalink)  
BrewPuBeaver's Avatar
*Big Schpellar*
 
Joined: Jul 2005
Posts: 3,192
Likes: 0
Default

172.57 at the wheels, hehehe

on the real, um i'll say 267 WHP
__________________
Reply
Old Aug 23, 2005 | 11:39 AM
  #4 (permalink)  
disalvoj's Avatar
Doughnut Grease
 
Joined: Dec 2004
Posts: 374
Likes: 0
Default

Originally Posted by redscooby
Just wanted to let everyone know I am taking the Legacy to Mastro this Thursday at 1pm. I am not getting tuned, just getting some dyno runs in case anyone wants to come and check it out. I want to know what this thing puts down. Ill post the results.

Thanks,
Eric
Don't forget to print out the Dyno Coupon from Mastrowrx.com. Hey it saves you $50 plus tax.
__________________
V/R
-Joe


My IWSTI.com Garage
"This is how I roll!" ~Jack Black
Reply
Old Aug 23, 2005 | 11:46 AM
  #5 (permalink)  
redscooby's Avatar
Thread Starter
It's slow now
 
Joined: Nov 2004
Posts: 221
Likes: 0
Default

I'm thinking closer to 245whp but 275ft-lbs tq. I dont know if their dyno reads high or low, but these are average guestimates.
__________________
05 Legacy 2.5GT Un-Limited
Reply
Old Aug 23, 2005 | 11:52 AM
  #6 (permalink)  
BrewPuBeaver's Avatar
*Big Schpellar*
 
Joined: Jul 2005
Posts: 3,192
Likes: 0
Default

very high... compaired to a mustang.

but i could make the dyno say you have 1000WHP if you wanted me to.
__________________
Reply
Old Aug 23, 2005 | 12:02 PM
  #7 (permalink)  
redscooby's Avatar
Thread Starter
It's slow now
 
Joined: Nov 2004
Posts: 221
Likes: 0
Default

Originally Posted by BrewPuBeaver
very high... compaired to a mustang.
It must read high because of no tire slip compared to a mustang dyno, just a guess.
__________________
05 Legacy 2.5GT Un-Limited
Reply
Old Aug 23, 2005 | 12:10 PM
  #8 (permalink)  
BrewPuBeaver's Avatar
*Big Schpellar*
 
Joined: Jul 2005
Posts: 3,192
Likes: 0
Default

a mustan takes in consideration that you have tires on the car....
__________________
Reply
Old Aug 23, 2005 | 12:35 PM
  #9 (permalink)  
esemes's Avatar
TTwins are my fav
 
Joined: Nov 2004
Posts: 895
Likes: 0
Default

it reads accurately, imo.

the only thing not factored by many is that it only takes about 12-15hp/pod to spin them up.....

the "back - in" factor on these dynos just isnt the same as others.....

so, i assume about 60hp total loss, is about the true grit of things.....


ps- 267.7/283.4

pss- make certain that you have the proper airflow over the i/c and the intake opening.... every bit helps! (ikm sure B.H. knows this already, but sometimes others set the dyno up, and may not have it done right)
__________________

www.gsxRpaddock.com <---gsxR research, solutions, & support
www.iWSTi.com <---STi research, solutions, & support
www.TOPSPEEDsales.com <---STi premier tuning and performance
Reply
Old Aug 23, 2005 | 12:41 PM
  #10 (permalink)  
I'm Slow's Avatar
I'm Slow
 
Joined: Aug 2003
Posts: 10,608
Likes: 0
Default

nice, hope everything turns out good......I would say about 250whp/260tq
__________________



550/550
Reply



All times are GMT -8. The time now is 08:42 AM.