On thursday night i had the pleasure of pulling a good size piece of metal out of the sidewall of my rear drivers side tire. My question is, do i need to have all 4 of the same kind of tires to be able to drive this thing or can i put 2 different on the front than the rear?

 

I have heard it both ways. I've heard if you just do both tires on the axle, you will be fine. But I've also heard that you have to do all 4. You can do different brands I would imagine, but you're going to want the same tread amount at all 4 corners.

 

ALL FOUR HAVE TO BE THE SAME SIZE. if you put different sizes on one axle it will mess up that axle's diff, and if you put different sizes front and rear it will mess up the center diff. so either way you have to make sure the tires outside diameter are all the same. you cant always go by the size cuz a goodyear 215/55R16 could be taller than a nitto 215/55R16. on www.tirerack.com they tell you the actual height of each tire so you know what you can and cant use. hope this helps

 

Fixed, got an exact replacement for the tire.

 

should have gotten some azenis dum dum

 

Amen. Or Kumho MXs.

Did u put another crap ass RE-92 on it?

 

Right, i forgot i had an extra $300 sitting around. Im saving for wheels and tires at the same time.

 

Sorry off of subject.

Hey Jon the background in your sig. Where is that? I'm trying to find some kind of cool background so I can a pic of my car and Chris's side by side. Think you can help me out?