long story short my wife and I got into pretty bad and I took my fustrations out on my car its a ls teg minnor mods i/h/e/im/big tb and a ectune well she saw 8500 a few times then sat for a week notice a small leak out the cam plug and replaced it however drove it tuesday and noticed large amount of blue smoke out of the rear of the car I know she is hurt I have been told its the head gasket I have also been told the the piston rings are now shoot I need some tr insite to fine tune my problem thanks matt replyies a opinions are welcome....

 

Rings...blue smoke is burning oil...I doubt it is a headgasket issue.

 

just finished the compression test cylinder - 4 -170psi cylinder - 3 - 175psi cylinder- 2-170psi and clyinder -1 - 135psi that = bad ring to me

 

Do you have up graded valve train? If not could have possibly bent a valve and messed up the valve guide seal. But if so, it sounds like the rings

 

+1 on the valve

 

ouch expensive thing to pay for just for being pissed

 

Protip: set your rev limiter BELOW engine speeds that break things.

 

^ lmao...my cold limit is 6k hot limit is 7.2k

 

no stock

 

I"ll remember that