View Single Post
Old Apr 29, 2019 | 02:00 AM
  #12 (permalink)  
senor honda's Avatar
senor honda
Registered
 
Joined: May 2005
Posts: 104,820
Likes: 21
Default

georgiapiSenior Member
Join Date: Jan 2017Posts: 207Feedback Score: 0 reviewsHad a little scare yesterday during test panic stops down from 70mph and the noise was like I never heard before, a rumble like I was running over something combined with the tires protesting. Impressive braking though. This rumble almost drowned out the hard braking slot purr.

Basically its just the ABS doing its job and to me a new experience. We have all heard and felt the ABS cycle during lower speed wet or sandy/gravel conditions.
During a panic 70 to 10mph on fresh dry pavement and good tires is a different animal. I thought something was wrong. The ABS has a much harder job to do under these conditions and this is what I heard.
I contacted a friend who after hearing me out said its normal and may lessen after more break-in and knowing I have a Foxwell ABS/Airbag scanner, out of curiosity told me to check for codes, try a brake pedal calibration, and see if it will initialize the ABS. He says if anything shows up I could lessen it some there.
So it gives me options, ABS Bleed Brakes, Initialize ABS, Calibrate Brake Pedal, and scan Codes.

If it will not initialize its already initialized. This mainly for replacing/repair ABS module work. It was initialized.
If the pedal needs calibration it will go through the steps telling you to press the pedal. If its already calibrated it will just indicate so. It needed calibration.

It found a code but before clearing it I used my HPTuners and OBDlink MX scan devices to see if they see it and they did not. There was no dash light. I have had my HPT and OBD devices connected recently with no codes shown and was curious. Interesting.
I reset it with Foxwell the scanner. For the most part if you have a dash ABS light your ABS is off line. I had a code but not showing on the dash.

After this it all settled down. It was there but lesser, and progressive in degree as I tried some panic 40mph to 5.

Now I have more of a normal looking bedded rotor with the Amber hue but can still see the machining. Feeling better now.Attached Thumbnails
__________________
Here is the listings of ALL New Mexico Car Events Including Route 66 Anniversary
https://www.tamparacing.com/forums/t...ar-events.html
Top Car Club Meetings? Click a city
Got a video? Email it to
Bobfixesitup@yahoo.com
________________________________________________


Keystone Motor Club (Founded 2012)... Free car show Every 3rd Saturday, newsletter is
https://www.tamparacing.com/forums/e...-car-club.html

Keystone picture gallery is here:
https://carstoshow.com/eventdetails.aspx?eventid=93202

Veterans and Friends
on First Saturday...Some pictures....
https://carstoshow.com/registerevent...eventid=102331

Port Richey Rod Run at Coast Buick GMC
https://carstoshow.com/registerevent.aspx?eventid=99114

50's Diner US19.... A Florida Attraction.
1730 US-19, Holiday Fl 34691 click: https://www.tamparacing.com/forums/t...acing.html CHRA sanctioned cruise-in.
Cruise-In; Free; Every Saturday 5-8PM plus 10% off the whole menu to cruisers
50's Diner pictures are here:
https://carstoshow.com/eventdetails.aspx?eventid=93194

All Cars Every 2nd Saturday Free Breakfast: Since 2015 and more. click: https://www.tamparacing.com/forums/e...ast-tampa.html

Tampa Racing.com covers the Tampa car scene and supports many fund raisers, worthy causes and events that enrich our community. We hope you enjoy them all.
What do I do? ---- on-site *Aftermarket* spring/suspension installations --- on-site impact wrenching---street lowering with your own stock springs...........True Bi-xenon HID projector headlight conversions........ Much more at Bob's Garage!
https://www.tamparacing.com/forums/b...ontact-us.html
https://www.tamparacing.com/forums/b...e-senor-honda/

























Reply