[h=1]2007 Ultra Starter Problems[/h] I am having problems starting my 2007 Ultra starter. Everything seems to be working correctly up to the point where you push on the starter switch and then all I hear is the starter relay clicking. I have checked all connections that I know of and have found nothing loose. Battery is good but starter is doing absolutely nothing. Someone told me to run a jumper wire from battery to control wires on the starter solenoid and see if it cranks. Have any ideas on how to help?


How do you know battery is good? What tests have been done? Has the relay been replaced (cheapest place to start)? Use the service manual and trace the relay power feed and ground. The manual has a great troubleshooting section. Yes, you can feed 12 vdc directly to the starter’s solenoid where the green wire goes in, unplug the wire and make sure the m/c is in neutral, but even if this spins the starter and starts the m/c, you have not fixed the problem. Use your h/d service manual and common sense, you can do it. It is not the starter motor but the control to the starter motor. – Wrench Safe, FMH


Related Videos:
Starter Sprag Clutch
Starter Install

Related Questions:
Starter Tips
Motorcycle Starter Problems & Testing Tips


Tags: electrical, harley davidson battery, starter, Starting Problems