Originally Posted by
burgy240
discolored out put is usually a sign of the bulb dying. It is also a sign of the ballast or voltage being irregular.....which leads to the bulb dying. Obvious at this point however I know... When replacing HID bulbs they must NEVER be touched by your skin. This is the MOST common reason for one bulb dying faster than the other. A voltage irregularity will do the same thing and based on the other electrical problems that seems to go along with your issues, I would guess it is in your wiring or your ballast. G/L
Tomorrow, i will swap the ballasts and see if the problem migrates to the other side. If not then that's honestly good news. I will then swap the bulbs and try that. If the problem migrates then it must be the bulb. Although, i dont see a bad bulb making my lowbeams both flicker when i turn on my highbeams.