Originally Posted by
Zman
yes you did Jim, but you said the SN95 axles are 1.35 on each side and they are not. They are only about .75 each side. The 99 and up are the longer ones.
sorry dont know the offset, forgot. When I did it, I did a search on the corral under 315's
I apologize. I meant roughly 1 3/4 for both sides. Not 1.35". 1.5" in total is correct. I dont know why I typed that.
I didnt mention the difference for the 99 - 04. Though I should have. The 99 - 04 axle housings are wider and axles are even wider then the 94 - 98. I used to know exactly how much, but right now it has slipped my mind. I guess I'm getting senile already. The 94 - 98 axle housings are the same width as the fox housings. Only the axles make them wider.
Supposed to be able to just take the caliper brackets from the SN95 cars and flip them to work with fox length axles. I havent tried this personally,.. though I am contemplating it with my 93 when I get it back. I think drum brakes will look a little out of place with 18" wheels. I was trying to avoid it because I didnt want to change my master cylinder and proportioning valve. But if your going to do it may as well do it right.
Hurst