my buddy mario came up with it.all we did was cut the top of the motor mount off and used some 1/4 steel i got from lowes drilled it and welded it up and it moved it just enough to clear the header from hitting on the passenger side and moved it just enough that it didnt throw the tranny to far out of the way.looking at the mounts after i painted them you can even tell they were ever cut

the way we had it a few days ago it cleared but it made the motor sit to high and the turbo was hitting the hood.

even tho it moved the motor over a 1/2 all we had to do was relocate the proportioning valve and its all good