Originally Posted by
luke81
I'm not sure I follow what you're missing. The VSS, reverse, and parking brake wires will not be in the head unit connector. You need to locate them elsewhere in the vehicle and make your connections there. As was said, you can ignore the VSS on that unit. I actually have that exact same unit in my truck. And you can ignore the reverse if you're not using a backup camera.
Grounding the mute wire only applies if you've moved the pin to do the bypass, in which case you'd also ground the parking brake with it.
Are you burning the nav disc onto a CD or a DVD? I'm pretty sure it needs to be a DVD, not a CD.
I burned it using a DVD+R dual layer with ImgBurn software at 2.0 speed with verify checked...
I thought that the unit plug had to come with the parking brake connector since it is the one that comes originaly hooked up on the unit. When I look online for the factory plug, they all come with the wires are missing. I don't mind about the VSS, and the reverse but wouldn't the unit suppose to work if the parking brake is not connected? And the wire is the one I don't have because it didn't come with it.
Here is what the original is suppose to look like
Pioneer Avic-D3, AvicD3, CDP-1063 Power Harness Plug - eBay (item 380224060037 end time Feb-06-11 14:18:41 PST)
My factory radio is out, I have a huge hole on my center console, and while driving all I hear are the voices in my head.