Originally Posted by
LongFellow
I'll check the front clearance on my car tomorrow and give you the space left. The lower bracket is slotted though so they have more clearance than standard stuffs but it looks close to 5mm. I think you'll be good especially with 60mm springs as long as you can slot the lower camber bolt and run upper plates that will take up the rest.
You running the veilside180sx housings ?
I'm probably not going to be using mine, i've managed to come up with a combination that should get me a compression independent of height, bilstein PSS9 setup up front. Already got noltec camber/caster tophats to go on them.
Considering using bilstein ASN for the rear, or maybe one of their non threaded units and custom sleeves to run adjustable megan, or stance Z32 lower brackets.