a pic of what i mean by fill it till it runs out. but like a said, you may want to just flush what you have and put some new gear oil in there. if you are not able to use Honda MTF, 90W gear oil should work. The drain bolt on the tranny should be magnetic, so don't be surprised if you see metal shavings on the end of the bolt. get both washers from Honda, slap them on and fill up your gear oil, drive it and see how it goes. and i appreciate you asking me for help; i've never worked on a tranny before, i wouldn't want to screw up your shit. hope this helps. good luck.