Originally Posted by
Epstein
I've got a z32 knob, and the whole thing sticks up over the console with that shifter mod. Did you cut the upper part right where it flares out, or up higher near the threads?
i cut it right below the flare so i could use the extra metal from the flare to weld it so i didnt need to use filler.
the problem is is that the shift knob i made for the car before i did this i made to sit really low. the top of the knob material sits about a quarter inch from the top of the threads on the shifter. i'm just gonna put my stock shift knob on there until i machine a new one.