I have a forced performance TD05H-18G turbo running the internal wastegate. I think it needs to be adjusted because every time i get into the top end of the RPM range in 3rd gear, the boost simply cuts out (about 6700rpm), and the check engine light comes on. It reads that Wastegate Performance/dynamics. I check my wastegate duty thanks to the Cobb AccessPort, and once it gets full throttle past 3500rshared_pm to redline, it reads 0% when according to my map it should be reading 38%. I think my wastegate arm needs to be adjusted. I bought it from Tupass and he had it set at 15psi, and i lowered it, but might not be at 9psi. Think it still may be set too high?