Originally Posted by
Z28ricer
So dan, realistically I should be able to bolt the subframe in place, after gutting the original bushings, then bolt the rest in place, and fill the voids with the liquid poly, without worrying about it being off center due to the locating pins ?
Don't need to gut the bushings. Just line up the subframe and jack it on. Then fill the voids that you see. Windo Weld is actually a heavy polyurethane. It's a lot harder than the stock rubber for sure. You don't need to worry about it being off-center because the bushings are identical left to right and should deflect the same on installation. Remember, the total deflection is 5mm per bushing. If it's off 20%, which is huge on an engineering scale, is only 1mm. Once you see it in there, you'll wonder why you ever worried about it.