It's not just the dizzy! The injectors need to be OBD0 as well! If you are DPFI you will need to wire up for MPFI! You will need the a mount kit
http://www.innovativemounts.com/Prod...ductCode=19150

The injectors can come from any OBD0 Teg or Civic

You can use the stock OBD0 LS ECU!

I would look into better links then cutting stock teg ones unless you're good with fabing.

You'll need 90-93 non-ABS axles! The SI harness is fine for an OBD0 LS swap, also if you have to go MPFI then that will work to. The LS swap it one of the best swaps for a first timer! It should be all plug and play if you have the right wireing!

Your hubs and brakes are fine unless you have the STD 4 speed model. You will then need to swap the front hubs!

Good luck and there is a shit load of stuff to look up on the interweb!