I put back in, the same thing that came out since I know it was working at some point. Different part numbers may not interchange unless the dealer says the old part number has changed to the new one.
If the old ecu is related to the shifting problem and sometimes works,
have you tried cleaning off and lubing the connector pins in case they might be a little corroded?
If the ecu is not related to the shifting problem, I would be looking into the linkage/cable to see what can be adjusted.-Bob
Originally Posted by
b_boysaiyan
sorry for the confusion let me start again
my cl starts and drives (its a automatic) and while driving it will kick it self into neutral
befor it does that the tranny shifts perfect all gears work but when it messes up no gears work . if i turn car off and put it in drive again it will go but also sometimes when i put it in drive it wont go but if i change it to another lower drive like 1 or 2 it will go after that when its going you can put if in regular gear and it will work until it messes up ..
it ran a pcm code saying the pcm faulted . i got a ecu off of ebay from a 2002 cl but it didnt even start my car when i installed it the ecu was a pge-a57 the factory one from my car is a pge-315 i wanted to know if the a57 would work like how p28 and pr4 ecu would start civic /integras because i was wondering if the ecu that i got off ebay was bad ? or i needed a pge-315 b/c thats what it had in it