My b16a hatch is having alittle bit of a prob right now. At right around 3k rpms there is a pretty loud noise comming from my head. before that there is nothing same as after. Now i have been reading up alot on it and i cant find to much about them. But what i have found out on Lost motion assembly is that Type R ones go for right around 30 dollars a piece and theres 8 :o . From reading up on Honda-tech.com i found that Omniman uses this : (2000 prelude vtec LMA's are far less exspensive but you will have to use a .040in thick washer under them. they are just as stiff as the ITR LMA's but only cost about 8-9 dollars. i have them in my car and have run them in many engines that i have built with no problems! they look like tear drop shaped valve springs )


All my valves are fine everything is working good but i just need to get that damn noise out of there.