Originally Posted by
HELMUT RONER
The flowtubes for mufflers on 1994/1995 5.0 Mustangs are the same length as the flowtubes on 1986 through 1993 5.0s, right? Been out of the game so long I'm starting to forget a lot of the little things. Looking at a pair of Spintechs that came off of a 1994 to put onto my 1991. They already have the flowtubes welded onto them which is what I need to achieve a quick install.
Yes,.. they are the same length. (Or should be the same length if they are not). I've taken a BBK O/R H-pipe from an 96 2v 4.6 that had BBK long tubes and used the H-pipe, and flowmasters with flowtubes and used them on an 86 that had BBK long tubes on it. Needed a little bit of tweakig with a pry bar,.. but bolted down just fine and no leaks. Shorty headers and stock manifolds will obvisouly be different and not interchange. Same with the mid pipes between those cars. But from the flow tubes back,.. your golden.
The tail pipes are similar as well but on the Pre 87 GT's and 87 - 93 LX tail pipes are 'usually' 2 - 3 inches shorter then what you will find on 94 - 04 SN95 and New Edge cars. The Fox tail pipes will work on the SN95 cars,.. but they will look ridiculously long if you use SN95 tail pipes on a fox. They should be cut back if they are straight pipes. If you have the chrome tips.. well,.. I dunno. LoL
Hurst