Thread: data logging
View Single Post
Old Apr 2, 2009 | 01:54 PM
  #1 (permalink)  
specVmatt's Avatar
specVmatt
400hp club, barely
 
Joined: Apr 2007
Posts: 2,767
Likes: 0
Default data logging

Well, my cel for the front o2 went away, so i reset the ecu and got the dynamics multiplyer to 1. afr's at cruising are perfect according to my eugo and accessport. 10.0-10.4 at WOT. Car feels so slow, obviously because of that. For some reason when stopped though, the car idle's really low and stalls on occasion. i didnt really drive the car much since i reset the ecu. So i figured it needed to relearn some stuff. I just took it out and did some logging with the accessport. Once I was done, I realized the idle issue is nearly gone. So thats good. I run upstairs to install the accessport manager and plug the accessport in. What do you know, it is not compatible with windows vista 64bit. So once I get a computer with 32bit, ill post up the logs and maybe someone can help figure out what my issue is. sigggggggggggggh.
__________________
Coyote
Reply