Try jumpiong the starter first to eliminate that option. Here's how u do it...Get a short piece of wire preferally 4 or 8 gauge. On the starter u have the main wire that goes to the starter(from battery) and rt next to that wire is a another wire with a boot on it(goes to clutch safety switch). Take that boot of and jump that connector sticking out to the power on the starter(make sure u r in neutral). If the motor turns over its a bad clutch safety switch if it does not turn over its your starter. More than likely one of those is your problem
Last edited by hondachris1994; 03-20-2009 at 12:45 PM.