leamangriffin04

I checked everything. The resistor reads 6.5 ohms across the board. The sensors all have power, I have fuel in the cylinders and spark in the plugs. She will turn over like a champ but no starting. Every ten or so tries she will sputter once then back to just turning over. Im thinking firing order. I know the order, but is it front to back on the coil pack or back to front? Also I found I had a huge leak. Someone who owned the motor b4 me had a washer inbetween the intake manifold and the head. There was a huge gap across the whole thing. Fixed it and it still wont start. There are no vacuum leaks, I checked the timing. I set it with the #1 piston at TDC, I set the crank to where the notch aligns with the T. Then I put the two cams to where the notches are at 3 oclock exhaust and 9 oclock intake. Help me if I am doing something wrong.......