Originally Posted by
Outkasted24
Mmmmm, The BRAKE Lines from the EX will fit the Si calipers, But you do know you'll have to buy Si e-brake cables.... right?
The EX ones will not work.
What part of the line did the previous owner cut, before or after the coupling/connector?
G/L with the swap, It's pretty easy to do except for the cable swap, unless you have small hands and a lot of patience.
I have the e-brake cables. I have everything besides what he cut on the brake hose. If you start at the banjo bolt on the caliber, follow that about 6 inches and you come to a connector, there is about 5 inches or so of brake hose after the connector.