Thread: D16z6 into a D15b2 89' HB problems
View Single Post
Old Apr 19, 2003 | 09:28 PM
  #1 (permalink)  
Sourskittle's Avatar
Sourskittle
Where racing is a pleasur
 
Joined: Dec 2002
Posts: 2,112
Likes: 0
Default D16z6 into a D15b2 89' HB problems
We've swapped the motors and the Z6 is sleeping in the car right now, but it won't start for some unknown reason.

We've checked all the grounds ( fuel pump rely, tranny/battery, and valve cover ).

We are using an Si PM6 ECU, pm6 harness, dizzy, injectors, resistor box, and intake.
I have a V-AFC to control the V-tec part.

I swapped the Z6 fuel rail ( and FPR ) on to the Si intake.

Anyway, I was looking for some pointers as to why it won't start. I've put two days into swapping it and it just won't start for some reason.

The motor was running when pulled from its donor car, so its nothing "motor" related.
bleveret@tampabay.rr.com
__________________
86' snapper electric powered lawn mower.
95' F-350 crew-cab powerstroke 5-speed 21.63mpg
03' G35 6-speed coupe. Grey on black.
02' wranlger apex edition with EFI 5.0L 302 SBF. 5.5'' lift, custom 4-link 8.8 in the rear, high pinion D30 front with locker.
A wise man once said, " I didn't wash my hands b/c my D**K is cleaner then ANYTHING, in that bathroom"
Reply
0