View Single Post
Old May 10, 2007 | 09:26 AM
  #1 (permalink)  
Eluzzionz's Avatar
Eluzzionz
Registered User
 
Joined: May 2003
Posts: 4,411
Likes: 0
Default crx 88 hf forged internals turbo kit

Ok first of all i havent gotten the car back just yet so theres NO miles on the fresh rebuild..but the lenght of time it has taken to build is forcing me to sell..
so here it goes
88Crx Hf Light Blue Has some primer spots but no rush or dents.
Has 15" Ls mesh wheels with great front tires decent rear tires
Comes with skunk2 springs and tokico shocks
has 2.25 in straight pipe to fart can
rear interior isnt installed but i have it

Ok now the Engine most important part
B16 JDM head stock with no problems at all..
B18A1 block bored to 81.25mm
SRP Forged Pistons
Eagle Rods
Arp Rod Bolts
LS Crank polished
B16 JDM Tranny

Like mentioned the motor will have hardly any miles on it when i sell..i will put a few miles on it obviously driving it home and trying to break it in properly.so for test drives ill take you out for a spin nothing crazy until i get 800-1000miles on the motor then ill take it to 8200rpms but im positive there will be no problems at all ..2nrwerks has built this motor before with highcomp pistons so i dont think there will be any problems here..i will not let anyone drive the car unless cash is in hand and they arent a punk that will dog the car and risk injuring the motor. I dont have any pics right now but once i get the car back i will take some..

Im looking for 5500obo for the car

Now..i have a FULL turbo kit thats Turbonetics.
Consist of t3/t4 turbo
Log manifold
3in dp(is dented)
all piping
Spearco Core Intercooler
Grredy bov
Turbonetics wastegate with 9psi spring
RC 550cc injectors (need resistor box which is obviously on the crx)
GSR OBD1 ECU chipped and tuned for 10psi on gsr with 550cc injectors
Walbro 255 Intank fuel pump

also have a 3in polished muffler from magnaflow i paid $100 for as well

the turbo kit im asking $2200 for everything

OR 7000 for the car + turbo kit..as soon as the car is broken in the kit can be installed and you wont need anything but a 3in exhaust piping..

This setup will be easy for 350whp and in a 1800lb crx is capable of low 11s maybe 10s with professional driver

NO LOWBALLING OR FAKERS!
__________________

Last edited by Eluzzionz; May 10, 2007 at 09:31 AM.
Reply