Originally Posted by
brax90si
For that spindle to come off you are either going to need to get right spindle puller or take the whole spindle assembly off and take it to get pressed out. Or you could get grinder and grind down part of the hud enough to knock out the broken wheel studs. I have done this before and it works. That is really all you can do, it is a bitch I know.
-BRAXTON
this guy hit all the options on the point... And trust me! These are your only options. I end up using the puller (3 guys range 200-300lbs and 3times ea. and we still did not get it off...) One side wk'd but we had to grind the other... All was a payne in the ass!!! Arm starts to hurt again thinking about slapping that puller... ouch!