Originally Posted by
cubanprince1
thanx bro....i gotta pull off the pan and tap it, do the return line, and install downpipe/dumptube/wastegate.....then i gotta do some shit to the stock injector clips to fit the rc engineering 720cc injectors.....that should pretty much be it....
You are very close...
If your injector clips are obd1, you simply snip the center tab inside of the rc injectors to use with the factory obd1 clips. (Usually rc injectors do not even have this tab, but if they do you can simply snip them.)
720cc injectors.. low impedance I am guessing.
You did wire in a resistor box correct
Just checking.