Alright here's my current build and setup:

CURRENTLY INSIDE CAR:
Stock USDM B16A2
AEM Cold air intake
P28 Ecu chipped by John Vega(Phearable.net)


CURRENT PROJECT:
B18C1 Bare Block
JDM B16A P30 Pistons
Brand new LS rods/rings
ARP bolts

MY QUESTIONS:
Was wondering if this setup will work if I use my stock B16 head and if a LS crankshaft and LS rods will work on the GSR block. Also I would appreciate any opinions to help me out. Thanks in advance.