Originally Posted by
BrewPuBeaver
well if you plan on doing road racing i would suggest a aqua mist water injection or 50/50 set up. you can tune it to make more power with the injection. or make the same amount of power but have you motor work 15-20% less.
Originally Posted by
fadedSTi
go meth and make that green work
Wouldnt I have to worry about the pick-up in the tank running dry in a high speed corner? Thats really the only problem I have with running meth.
Originally Posted by
BrewPuBeaver
the way i see it. if your going to do head work, or any thing with the heads. do it all at once. sine you have the motor out anyway. you would loose a little on the left side of the band, but the right side wouls see a vast improvment. so the left side really doesnt matter on the track in a road race.
I had thought of that but I dont have access to a flowbench and I would rather make sure the ports all flow the same than assume they do. I dont really want to pull the heads either cuz then I may need new head gaskets. The ones I have on there have 0 miles on them so they MIGHT be reusable.