i have a custom built intake manifold on it and a stock 99 neon rail.the srt injectors are like 3/4 shorter than the ones that fit with this rail, there wouldent be a proplem with cutting the rail and remounting it but the shrader valve is in the middle and right now at that height its very close to just going strait into the back of the manifold.its hard to explain but the manifold is like the blackdog or the mopar race ones that look like square tube.so i cant cut it down.therefor we need a 03 srt rail with the side exit schrader valve so i can bolt it up and have all the room in the world to put the return line.the 04 - 05 rails i heard dont have the valve so it has to be 03.or if anybody has a aftermarket rail like aem or whatever with a return line opening that they want to sell for a neon.we can use that to.