Well i replaced the slave today (it was leaking). But the problem still exists , the transmission will drive fine at times and at times it will go into gear , and then start whirring/grinding like it's stuck inbetween gears. It usually only does this wheni come to take off from a start (in 1st) but if i put it in neutral afterwards it will stop , then i'll try to see if 2nd will go in ... nothing ... 3rd nothing 4th nothing , then i'll put it back in neutral and pump the clutch and it will just go right into gear ... (WEIRD!!) Could this be a worn pilot bushing (i did not replace this piece) I did replace the throwout bearing though.