Originally Posted by lead
take off your fly wheel cover and stick a big screw driver in there to hold it in place then take off the nut, you don't need air tools not to mention you would need a big air gun to get that off like a 700 lb + impact gun i know my 500 lbs one didn't take it off. or you could do some backyard mechanics and throw on a breaker bar and turn over your engine a few times, that will get it off.
honda = CCW turning engine = bumping the starter will TIGHTEN the crank pulley bolt.
i can't really use anything BUT an impact wrench. i wouldn't be able to get enough leverage on a breaker bar cause i don't have enough "extension" to get the bar out of the wheel well, and in that scenario the torsional force would probably just snap an extension. ultimately it leads back to the idea that i don't have an extension long enough
