Another Turbo Timer Question.....
Picked up a used TT from a member here on TR. Its the HKS Type 1 model. I hooked all but 1 wire. (The speed sensor wire.) Anyway, Turbo Timer powers up, RPM read out works, Voltage read out works, Timer comes on, starts to count down when key is turned off......"But" car does not stay running when the key turned off. I have 12v going into the TT, but Im not getting 12 volts out of the TT that is hooked up to the Ign. wire. Could this TT be fried? To make sure I had the right wire, I removed the TT wires, started the car took a wire from the 12v hot. jumped it over to the Ign. switch removed the the key and the car stayed running. Reinstalled the TT and same thing. For some reason the tt is not letting the 12v go through to the Ign wire to keep it running. Any ideas?