I just finished installing several gauges in my crx today and I want to know what the readings should be at or near.

its a jdm b16 xsi engine with obd1 upgrade, p28 ecu hondata s200b with p30 basemap, aem short ram, aem cam gears set to 0, 255lph walbro intank pump.

3 gauges are autotechnic and are , volt meter, oil temp and oil pressure.

2 gauges are autometer cobalt series and are fuel pressure and egt.

I know what the voltmeter should be at, but not sure on the others.

fuel pressure reads 38 at idle and 40-41 on throttle, oil temp reads 175, oil pressure is 40 at idle 80 on light throttle and 90 wot above 4.5k rpms and egt probe isn't inserted into the manifold, mainly cause it's stock and I didn't want to pull it just to tap it when the turbo is going on in the next 4 weeks or so.

thanks fo the info