i was losing alot of oil so i did a compression test on my ls/vtec 93 ls block with b16a1 head and 10.6:1 usdm type r pistons which puts me right about 11:1
my compression test was 150150145150
they are all very close but is this the right lbs for this setup? or should i be at like 180 or what???

what should an 11:1 ls/vtec compreesion test come out to??
i got about 150 but is this right???? i think im getting some blow by. if not it must be my valve seals. HELP!!!