Originally posted by YBlegal
so just use the stock mounts, minus the rear tranny mount and for that just use a 99-00 SI rear mount? and as far as the axels go, will any B-series axels work with any B-series tranny? and also will they all work with my spindals, as far as the splines go? and for the wiring the IACV is the only thing needed to be rewired? and will a LS or b20 ECU just plug into my Factory harness? if so, would it be better to convert it to OBD1? thanx for all the info everyone...
Yes that is correct, use all OEM mounts & a 99-00 civic si rear lower mount bracket. Also to retain A/C use a 94-95 DOHC vtec delsol ac bracket.
Depending on what b20 motor you have, you may need a different intake manifold, but that will be obvious by looking at your motor.
Any 94-01 integra or 99-00 civic si axles will work, they are all the same part number at NAPA.
Concerning your ecu a obd1 ecu with a obd2a to obd1 conversion harness will work or obd2a p75 computer will work etc...
Btw, I hope you know you need a bseries tranny i.e. ls or b16 tranny etc..
Check out some helpfull links I have on the site in my signature.