Without knowing the exact series of sub it's a tough decision. If it's the aluminum eclispe 15 i looked at it's 800 watts max. Find out wether or not it's a SVC (single voice coil) or DVC (dual voice coil) and what ohms they are. If they are dual 4 ohm coils then you can just run it as 8 ohms then bridged into 4 ohms and then just keep the gain down to maximize SQ on the Rockford yet you can still have extra power left over if you want to add more subs later. I'd go with the rockford. I've heard eclipses on rockford amps and they are a nice match. We'll include the wireing block to go from 4awg into 8awg (dual 8awg power terminals).
$210 - amp, covers, (2) 8awg power wires with (4awg into 2-8awgs)distribution block, 2 8awg ground wires (terminals are close enough that a split 4awg will work.
AMP LOOKS INTIMIDATING, absolutly cosmetical great and is tested SOLID in tough tests. This amp has been burped for comps under fans at .65ohms and still puts out around 2000watts without cliping. This amp will sing at 2 or 4 ohms.
__________________
she said they call 15% blowjob tint for a reason