ive got 91 civic 4 door (LX) with a b16a1 in it. have 90-91 integra ls/gs axles in it. WHen u tighten up the spindle nuts all the way the axles wont turn....they bind on the back of the brake hub.

Are these the wrong axles?
Do i need to grind down the back of the hub slightly?
Or do i need to swap the hubs out?

if i dont tighten the axle nuts all the way they spin freely.
if it matters at all my hubs are 26 or 27 spline. there not the 23 spline crx/STD model hubs

some please help