RedPhoenix

Due to complications with life, this project needs to be stopped... Bleh.


Located In Tampa, FL
PM me for more details...


Here is a list of parts I have that I made in an excel sheet. I will be updating with pics as I go. Ill give this forum first crack at everything until the entire list is updated.


here is one pic of it as a whole though...



1988 Pearl White Targa Supra


http://img.photobucket.com/albums/v4...L/IMG_4229.jpg
http://img.photobucket.com/albums/v4...L/IMG_4230.jpg
Enkei NT03s
18x9.5 +27
18x105 +30
New, never had a tire moutned on it
$1,400


http://img.photobucket.com/albums/v4...L/IMG_4250.jpg
HAHN Racing Intercooler
2.5 in/out - same side entry/exit
$100





http://img.photobucket.com/albums/v4...L/IMG_4244.jpg
(cant see much in the pics since its on the car..but thats the adapter)
Quantum Auto W58 Adapter
1uz Flywheel
Clutch OEM/2200lbs PP
Howe TOB
Bolts/Lines
Has around 5 miles on it, literally drove the car then it sat for the last 2 years while I turbo'd it.
$750


http://img.photobucket.com/albums/v4...a/CRW_8770.jpg
Feramic Disc
6 puck, solid hub. 0 miles on it. Can have it converted to sprung hub for $100 more. Fits R154 or W58 (same spline)
$350





http://img.photobucket.com/albums/v4...L/IMG_4240.jpg
W58 DS
It spins..
$50






http://img.photobucket.com/albums/v4...L/IMG_4232.jpg
http://img.photobucket.com/albums/v4...L/IMG_4231.jpg
http://img.photobucket.com/albums/v4...IMG_4233-1.jpg
285/30/18 Pair
Michelin Pilot Sports A/S, decent tread
$150


http://img.photobucket.com/albums/v4...L/IMG_4234.jpg
Sumitomo HRTZ3
255/40/18
$60


http://img.photobucket.com/albums/v4...L/IMG_4236.jpg
Potenza... only 1.. 255/40/18
$20


http://img.photobucket.com/albums/v4...L/IMG_4235.jpg
3 Bridgestone Turanzas... 2 have nails in it.. 100% patchable..
$50 for all







http://img.photobucket.com/albums/v4...ps504ba46e.jpg
http://img.photobucket.com/albums/v4...L/IMG_4251.jpg
Gas Tank/Sump/New Seals
MK3 Tank, Custom SS304 Sump welded, with baffles.
Twin 1/2 NPT Outlets.
Comes with 10an and a plug fitting.
Brand New seals for all the stuff (filler, FP, Level, etc)
Sealed with POR 15 Gas Tank Sealer
$300


Misc Interior Pieces...
Very good condition Cloth Seats - $60
OK Door Panels - $30 pair
Misc other panels - $15 each
Anything else you can think of let me know and I will see if I have it..
http://img.photobucket.com/albums/v4...L/IMG_4261.jpg
Dash.. previous owner dyed it black.. I only noticed it when I took pics with flash... Has a crack in the plastic by the radio, fixed.. no cracks on top of the dash.
$50


Misc Exterior Pieces
Its pearl white in decent shape, let me know what you want.


http://img.photobucket.com/albums/v4...L/IMG_4264.jpg
http://img.photobucket.com/albums/v4...L/IMG_4262.jpg
http://img.photobucket.com/albums/v4...L/IMG_4263.jpg
Holset HX52
Billet Comp Wheel
3.5 Vband welded on housing, comes with matching vband/clamp (SS304)
Oil Feel/Drain flanges
Gash on the outlet, shoudn't affect anything...
$400


http://img.photobucket.com/albums/v4...L/IMG_4265.jpg
http://img.photobucket.com/albums/v4...L/IMG_4271.jpg
http://img.photobucket.com/albums/v4...a/IMG_1430.jpg
460cc RX7 Injecors, with new clips, new seals, new filter baskets...
$200
with 50w heatsinked resistors +$30


MK3 Bilstein Rear Shocks
Brand new, never bought the fronts
$150


http://img.photobucket.com/albums/v4...L/IMG_4219.jpg
http://img.photobucket.com/albums/v4...L/IMG_4218.jpg
H&R / Illuminas
MK3, None blown, decent rebound, everything seems good.
$300


http://img.photobucket.com/albums/v4...a/IMG_1791.jpg
Oil Cooler Block Adapter
1uzfe Oil cooler adapter - has -10an fittings welded to it.
Used for external oil cooler/thermostat etc...
$100


http://img.photobucket.com/albums/v4...L/IMG_4260.jpg
http://img.photobucket.com/albums/v4...L/IMG_4259.jpg
System 1 / Peterson Fuel Filter
These are around $125-$150 on JEGS... Cleanable SS Filter, pretty large.
One has a bunch of wrench marks $40
One is a lot cleaner $60


http://img.photobucket.com/albums/v4...a/IMG_7578.jpg
Rear Subframe
Reinforced with steel plates, DOM tubing...
Solid Bushings - needs new nuts.
First pass of welds went great, second pass looks mediocre at best.
However, its reinforced and ready to take abuse.
$150





Post 89 Front Subframe
http://img.photobucket.com/albums/v4...a/IMG_8006.jpg
$50





I will update this with pics asap.

CheesePhantom

A sad day, indeed.

But, I do have my eyes on those brakes.

RedPhoenix

updated list

RedPhoenix

updated

RedPhoenix

the entire car is being parted out, buy stuff

Flatline

how much for the whole rear passenger knuckle? i need the everything from the upper control arm, caliper, rotor, e brake cable and such. I had my upper ball joint snap and the caliper was ripped off the knuckle, cracked the rotor and the rear arm was broken off with a piece of the knuckle as well.

If you have all that available. thanks