William Branan
Spring Hill Florida
813-900-0677 (dont call before 5shared_pm weekdays. texting ok before 5pm)
williamb82@yahoo.com please shared_pm instead. cant access this from work and no internet at home currently. not sure when i can check it.



wiseco 9.0:1 forged pistons, 1mm overbore with moly coated skirts bnib SOLD!!!!



1mm os ss valves $250 shipped





ferrea titainum retainers bnib $320 shipped



comp cam valve springs bnib $80 shipped



arp main studs bnib SOLD!!!!!

ported and polished 7m head(has maganese bronze valve guides in it, but machine shop mixed them up. so some need taken back out and switched to the correct side) never used since ported. never been surfaced $800 shipped











lower intake manifold modified for 6 additional injectors. never used since modded $250 shipped





bronze vale guides (currently installed in head.)





garrett turbo setup $1400 plus shipping obo. turbo is a garrett t4 58mm inducer, 82mm exducer, 0.68 a/r turbine housing, also have a 0.94 a/r tangical tubine housing, compressor housing is polished and has a 4in antisurge inlet and 2.5in outlet. raptor racing ss turbo manifold, brand new never used. 44mm polished ebay wastegate. bnib never used. arizona performance 10an oil drain flange for the block and turbo. arizona performance oil feed flange with built in restrictor, m12x1.25 to 4an oil feed fitting for block. plus 4an oil feed line and 10an hard drain line.

 

also selling a 7m to chevy bh adaptor plate.

this is an adaptor plate that bolts to the back of a 5m/6m/7m block and has the pattern for chevy transmissions. you can bolt any rwd trans to this that has the standard sbc pattern. th350/th375/th400, powerglide, 700r4, t5, t56, 200r4, 4l60e, 4l80e, etc... it is made of 3/8ths plate steel. the starter alignment plate goes between this plate and the block. this is the adapter plate only.

asking $250+shipping.

 

ok, due to interest in some of the stuff separate, heres the separations im willing to do.


wiseco pistons $620 shipped. still have the receipt showing i paid $685 for them.



the 1mm os ss valves, comp cam springs, and ferrea titanium retainers $700 shipped o.b.o.

with the ported head that has the bronze valve guides in it, $1400 shipped o.b.o.

lower intake for 6 additional injectors $250 shipped o.b.o.

any questions, feel free to contact me.

 

bumpitty bump

 

bump

 

trade you a 03 yamaha warrior 350 for it.

 

already got a 2000 yamaha warrior 350. so no thanks.



also have my jim king 7mgte swap sub-harness. for 84 to 87-88 7mgte. i beleive it will work for 85 and 86 mk2's as well, but it was made for my 84. i have the install instructions printed with pics, and the pinout showing where to connect the 4 wires to the stock large 5m ecu connector, and the wires are color coded for the msd tach adaptor near the fuse box. the msd tach adaptor is not included. i no longer need this as i went megasquirt. $320 shipped.












also have a ct26 turbine housing from an 88 celica alltrac. it is a smaler a/r then the supra turbine housing. here are pics of it next to a supra turbine housing. the alltrac housing is on the left. $50 shipped.

 

jim king 7mgte subharness is sold.

 

bump. still lots of good parts left.

edit: arp main studs sold!

 

pmed