FS: Gen3 3SGTE FCD
Thread Starter
Registered User
Joined: Jul 2003
Posts: 124
Likes: 0
FS: Gen3 3SGTE FCD
I bought this over a year ago with plans to run a gen3 efi. I've decided that if I ever want more power, then i'll just get an EMS with some huge injectors. So...I have no need to hold onto this anymore.
Here is the original sale ad and I'm selling for what I paid + a little more to cover cost of shipping.
For those of you that don't have access:
$55 shipped. $50 picked up.
Edit: Do NOT PM me asking if i'll accept a lower price because I will not respond. The price is what it is and it can sit in my closet for another year if it doesn't sell.
Here is the original sale ad and I'm selling for what I paid + a little more to cover cost of shipping.
For those of you that don't have access:
Originally Posted by boostd4
I'm selling my Gen3 FCD, as I'll be going to a standalone and won't need it any longer.
I did the research on this one. This is basically what's called a "MAP Clamp." However, most cheezy map clamps just adjust the scale of the voltage so that the fuel cut voltage is higher or lower. That messes up your fueling strategies as Gen3's rely on the MAP sensor for AFRs.
This particular unit is made so that absolutely NO alteration of the map sensor voltage is done below the voltage cut-off point you set it to.
You adjust it by a philips screw inside the unit. It worked very well for me - I had it set to clamp voltage at the equivalent of 17psi, and I ran well over 20psi all last season with it.
Great for those guys who want to run meth or race gas and push the CT20b or other turbos beyond the low gen3 limit.
$50 shipped.
I did the research on this one. This is basically what's called a "MAP Clamp." However, most cheezy map clamps just adjust the scale of the voltage so that the fuel cut voltage is higher or lower. That messes up your fueling strategies as Gen3's rely on the MAP sensor for AFRs.
This particular unit is made so that absolutely NO alteration of the map sensor voltage is done below the voltage cut-off point you set it to.
You adjust it by a philips screw inside the unit. It worked very well for me - I had it set to clamp voltage at the equivalent of 17psi, and I ran well over 20psi all last season with it.
Great for those guys who want to run meth or race gas and push the CT20b or other turbos beyond the low gen3 limit.
$50 shipped.
Edit: Do NOT PM me asking if i'll accept a lower price because I will not respond. The price is what it is and it can sit in my closet for another year if it doesn't sell.
