For Sale/WTB Toyota Strictly Toyota related for sale/WTB

WHERE CAN I GET A 2jzgte/6spd complete motorset.

Thread Tools
 
Old Feb 25, 2008 | 10:30 AM
  #1 (permalink)  
spawn13b's Avatar
Thread Starter
Registered User
 
Joined: Dec 2004
Posts: 153
Likes: 0
Default WHERE CAN I GET A 2jzgte/6spd complete motorset.

Ladies and gentlemen,
I have just acquired an sc300 and I will be doing a 2jzgte swap real soon. I'm looking for a reputable source to buy this motorset. I know of Osaka Jdm Motors, but I think I can get this swap cheaper than 5500.
Just so everyone knows I will need an uncut harness, ECU, complete motor and 6spd. Please help.

Last edited by spawn13b; Feb 25, 2008 at 10:33 AM. Reason: changed title
Reply
Old Feb 25, 2008 | 11:38 AM
  #2 (permalink)  
kbprice's Avatar
Rocket Scientist
 
Joined: Apr 2003
Posts: 632
Likes: 0
Default

You will not get a US spec gte motor with a 6 speed for less than 5500. The tranny's alone are going for 3000+ and a compete us spec motor with a wiring harness will run 3000+. You can try the importers or look on Supraforums or Clublexus but there are hundreds of people out there looking for the same exact thing who have cash ready to spend and as soon as they come up they are gone. My advise to you is either build the GE motor or increase what your willing to spend.
__________________
'96 Supra NA-T
"I'm not driving fast, I'm flying low..."
Reply
Old Feb 26, 2008 | 06:53 AM
  #3 (permalink)  
spawn13b's Avatar
Thread Starter
Registered User
 
Joined: Dec 2004
Posts: 153
Likes: 0
Default

I found a place that will sell just the motor, uncut harness, and ecu for 1600.
This is the same place XAT uses to get all their motors. They guarantee quality. I didn't want to, but I may just go with an R154. The 6spd is just so damn expensive, and the R154 fits right in the tranny tunnel with no modifications nor would I need a custom drive shaft.
Reply
Old Feb 26, 2008 | 09:39 AM
  #4 (permalink)  
kbprice's Avatar
Rocket Scientist
 
Joined: Apr 2003
Posts: 632
Likes: 0
Default

Originally Posted by spawn13b
I found a place that will sell just the motor, uncut harness, and ecu for 1600.
This is the same place XAT uses to get all their motors. They guarantee quality. I didn't want to, but I may just go with an R154. The 6spd is just so damn expensive, and the R154 fits right in the tranny tunnel with no modifications nor would I need a custom drive shaft.
That is a JDM motor for sure. This means smaller injectors, different turbos, different cams, etc. Make sure your comparing apples to apples. It's cool if you are planning to go with a 290hp motor that you will be leaving mostly stock. You'll have to change the harness, turbos, injectors, cams, and a bunch of stuff on the intake manifold to bring it up to US spec, non of which are cheap and you'll still only have a 350hp motor. For what you would spend to do all that you could get a quality NA-t kit from Boostlogic and be making 500hp.
I'm not trying to shoot down your plans just giving you some other options that maybe you didn't thing about.
__________________
'96 Supra NA-T
"I'm not driving fast, I'm flying low..."
Reply
Old Feb 26, 2008 | 07:28 PM
  #5 (permalink)  
oASHo's Avatar
Lace Up!!!
 
Joined: Jan 2007
Posts: 4,532
Likes: 0
Default

i wouldnt trust osaka if they were the last source on earth. dont buy from them.
Reply
Old Feb 27, 2008 | 06:51 AM
  #6 (permalink)  
hillbillydrifter's Avatar
Registered User
 
Joined: Apr 2007
Posts: 1,676
Likes: 0
Default

JDM Miami. They are the shit. I got a RE motor from them and it rocks. They have awesome prices, motors, and are really honest and straight forward. They are worth the drive. I live 10 minutes from JDMAddiction and I would happily drive the 6 hours to miami anytime for a motor.
Reply
Old Mar 3, 2008 | 07:44 PM
  #7 (permalink)  
spawn13b's Avatar
Thread Starter
Registered User
 
Joined: Dec 2004
Posts: 153
Likes: 0
Default

I have heard of JDM Miami and actually called them, but they have none in stock. I have a 260k GE in my sc it just would not be smart to boost it. I'd have to rebuild it before I even thought of making it NA-T
Reply
Old Mar 3, 2008 | 07:46 PM
  #8 (permalink)  
spawn13b's Avatar
Thread Starter
Registered User
 
Joined: Dec 2004
Posts: 153
Likes: 0
Default

As far as Osaka goes I've seen dozens of motors come from them w/out any problems. My SR came from Osaka I've had no problems with my motor. When I got it, it was a very very clean motorset.
Reply
Old Mar 4, 2008 | 01:45 PM
  #9 (permalink)  
Star's Avatar
Registered User
 
Joined: Jul 2003
Posts: 574
Likes: 0
Default

since this is going like this I need a 6sp (v160) or R154 out of a supra GT or soarer.so lmk what you guys know.
__________________
turbo hatch is back !!
N/A= A forever lasting turbo lag!!......

"BOOST".....MY ANTI-DRUG

97 Nissan hard body beater "in co-part"dead
92 sc300 turbo
SOLD!!!
96 platnum silver SC300
93 street killer low 10 sec EG Turbo SOLD!!
07 sierra crew cab Z71 NBS
04 Colorado 4X4 "daily"
quit being such a pansy


for all your automotive needs call Collin @ Racing Integration at (813) 935-6720.
Reply
Old Mar 4, 2008 | 01:47 PM
  #10 (permalink)  
Star's Avatar
Registered User
 
Joined: Jul 2003
Posts: 574
Likes: 0
Default

Originally Posted by hillbillydrifter
JDM Miami. They are the shit. I got a RE motor from them and it rocks. They have awesome prices, motors, and are really honest and straight forward. They are worth the drive. I live 10 minutes from JDMAddiction and I would happily drive the 6 hours to miami anytime for a motor.
can you post their number?
I need a 6sp trans
__________________
turbo hatch is back !!
N/A= A forever lasting turbo lag!!......

"BOOST".....MY ANTI-DRUG

97 Nissan hard body beater "in co-part"dead
92 sc300 turbo
SOLD!!!
96 platnum silver SC300
93 street killer low 10 sec EG Turbo SOLD!!
07 sierra crew cab Z71 NBS
04 Colorado 4X4 "daily"
quit being such a pansy


for all your automotive needs call Collin @ Racing Integration at (813) 935-6720.
Reply



All times are GMT -8. The time now is 11:43 PM.