mk3 supra 7mgte part out
Thread Starter
yea sweet lemonade
Joined: Aug 2003
Posts: 1,053
Likes: 0
mk3 supra 7mgte part out
i have a 87 n/a hardtop with complete 7mgte swap. all parts have less than 3000 miles on them..
tranny is missing 2nd gear (r154) also have another r154 stuck in gear. could make one good one out of the 2
87 7mgte 410rwhp, 420 rwtq at 15psi
n/a 7m cams
ball bearing innovative turbo 60-1
stainless oil and water feed lines with all a/n fitings (30 minutes to pull turbo, easy)
ported stock exhaust mani
open o2 housing
44mm tial wastgate welded to turbo housing 15psi spring with dump tube. inlet and outlet are v band.
hks down pipe
550cc injectors
7mgte with cometic head gasket and arp bolts at 85ftlbs.
bran new from toyota turbo intake tube
real spearco mk3 intercooler with cfp sean aluminum piping for stock intake mani. with sard BOV. will fit stock turbo cars.
ACT 3200lb unsprung 6 puck clutch with freshly resurfaced stock flywheel
all new hoses and plug wires from toyta
87 turbo ecu and harness
HKS VPV with 550cc chip
apexi s-afc
can sell as a complete package or can part out.
tranny is missing 2nd gear (r154) also have another r154 stuck in gear. could make one good one out of the 2
87 7mgte 410rwhp, 420 rwtq at 15psi
n/a 7m cams
ball bearing innovative turbo 60-1
stainless oil and water feed lines with all a/n fitings (30 minutes to pull turbo, easy)
ported stock exhaust mani
open o2 housing
44mm tial wastgate welded to turbo housing 15psi spring with dump tube. inlet and outlet are v band.
hks down pipe
550cc injectors
7mgte with cometic head gasket and arp bolts at 85ftlbs.
bran new from toyota turbo intake tube
real spearco mk3 intercooler with cfp sean aluminum piping for stock intake mani. with sard BOV. will fit stock turbo cars.
ACT 3200lb unsprung 6 puck clutch with freshly resurfaced stock flywheel
all new hoses and plug wires from toyta
87 turbo ecu and harness
HKS VPV with 550cc chip
apexi s-afc
can sell as a complete package or can part out.
__________________
Last edited by hachibill; May 2, 2007 at 02:01 PM.
Induction Performance
Joined: Nov 2005
Posts: 358
Likes: 0
This setup is strong and makes great power, And believe me it will make whatever car its in move. Sad to see it go but buy with confidence!
__________________
2005 Mitsubishi Evolution. -Sold
1994 Toyota Supra 1249rwhp -Sold
http://www.youtube.com/watch?v=Se7lR...eature=related
http://www.youtube.com/watch?v=tJOcnI5CMe8
1990 Toyota Supra 7MGTE
814rwhp -Sold
Induction Performance
2005 Mitsubishi Evolution. -Sold
1994 Toyota Supra 1249rwhp -Sold
http://www.youtube.com/watch?v=Se7lR...eature=related
http://www.youtube.com/watch?v=tJOcnI5CMe8
1990 Toyota Supra 7MGTE
814rwhp -Sold
Induction Performance
Thread Starter
yea sweet lemonade
Joined: Aug 2003
Posts: 1,053
Likes: 0
i kinda want to get rid of the whole set up complete. if noone is interested in it then i might part it out.
for the whole motor set up with everything needed to drop it in i'm looking for $2500obo. which is a deal considering i have alot more than that invested to get a almost 500hp set up. again this is taking into acount that both trannies are needing work.
for the whole motor set up with everything needed to drop it in i'm looking for $2500obo. which is a deal considering i have alot more than that invested to get a almost 500hp set up. again this is taking into acount that both trannies are needing work.
__________________
Thread Starter
yea sweet lemonade
Joined: Aug 2003
Posts: 1,053
Likes: 0
what all do you want??
stock ported mani, athe mani and ohter various things have all had a heat coating installed as well.
turbo with all lines
o2 housing
water neck with welded on fittings for turbo lines
44mm v band tial with dump tube (15psi spring)
intake tube
down pipe
$1500obo
add 350 if you also want the 550's.
stock ported mani, athe mani and ohter various things have all had a heat coating installed as well.
turbo with all lines
o2 housing
water neck with welded on fittings for turbo lines
44mm v band tial with dump tube (15psi spring)
intake tube
down pipe
$1500obo
add 350 if you also want the 550's.
__________________
Last edited by hachibill; May 3, 2007 at 10:08 AM.
