Garage/shop cleanout: coils, 5 lug, rb25, s13, randomness
Garage/shop cleanout: coils, 5 lug, rb25, s13, randomness
NEW PRICES IN GREEN, EVERYTHING OBO!
Cleaning out my garage/shop. Need to get rid of some of this stuff. I can text pictures, by request.
S13 Ksport coilovers, not blown, very stiff: $400 SOLD
S13 full 5 lug swap, rears are z32/s14, fronts are conversion and unknown brand, they need bearings ($100): $150 $100
Red bride Low Max REP seat, with nagisa superlow s-chassis USDM driverside rail: $350 $300 SOLD
RB Parts:
RB25 5 spd transmission, has shifter and harness: $500
RB25 A/C compressor with bracket and weldable line ends: $40
Top mount turbo setup, manifold, Master Power .57 trim turbo (good), noname WG, and partial downpipe that will fit an S13 needs to be finished: $300
S13 parts:
3 sets front stock brake calipers, I think 2 have lines: $20/set
s13 stock exhaust, a little rusty: $15
S13 "muffler shop" exhaust (cat, 2.75" piping, megan canister muffler), sounded good on my sr and rb: $50
S13 xs power N1 dual tip exhaust, has all hangers but needs front portion rewelded: $40
SOHC maf, 175k on it, this is the one that works on S13 SR: $15 GONE
Also have an S13 hatch shell that is being parted out, random parts available. No body panels are straight. Missing a lot of interior. Dash has one crack over gauge cluster. Good sunroof. Clean title if someone needs a drift missile.
I may add more stuff. I am OK with trades, mainly looking for gauges (AEM preferred), R32 GTR seats, suspension arms, nice LSD (no J30), etc but let me know what you have. PM or TEXT 727-667-2106.
Cleaning out my garage/shop. Need to get rid of some of this stuff. I can text pictures, by request.
S13 Ksport coilovers, not blown, very stiff: $400 SOLD
S13 full 5 lug swap, rears are z32/s14, fronts are conversion and unknown brand, they need bearings ($100): $150 $100
Red bride Low Max REP seat, with nagisa superlow s-chassis USDM driverside rail: $350 $300 SOLD
RB Parts:
RB25 5 spd transmission, has shifter and harness: $500
RB25 A/C compressor with bracket and weldable line ends: $40
Top mount turbo setup, manifold, Master Power .57 trim turbo (good), noname WG, and partial downpipe that will fit an S13 needs to be finished: $300
S13 parts:
3 sets front stock brake calipers, I think 2 have lines: $20/set
s13 stock exhaust, a little rusty: $15
S13 "muffler shop" exhaust (cat, 2.75" piping, megan canister muffler), sounded good on my sr and rb: $50
S13 xs power N1 dual tip exhaust, has all hangers but needs front portion rewelded: $40
SOHC maf, 175k on it, this is the one that works on S13 SR: $15 GONE
Also have an S13 hatch shell that is being parted out, random parts available. No body panels are straight. Missing a lot of interior. Dash has one crack over gauge cluster. Good sunroof. Clean title if someone needs a drift missile.
I may add more stuff. I am OK with trades, mainly looking for gauges (AEM preferred), R32 GTR seats, suspension arms, nice LSD (no J30), etc but let me know what you have. PM or TEXT 727-667-2106.
__________________
...and then I wondered why I was on Stanceworks forums...
Originally Posted by PJ Prendergast
i went to a scrapyard in Kilcock today looking for my 180sx tail lights, no luck though
...and then I wondered why I was on Stanceworks forums...
Last edited by KendallH; 09-30-2012 at 08:08 PM.
For trades, would you be interested at all in XXR 513's and some S14 flca's w/bad ball joints? Wheels need tires but none are bent or cracked...lmk
__________________
-Julien
-Julien
Not too interested in the wheels (5 lug), but I could use the flcas. What items were you interested in?
__________________
...and then I wondered why I was on Stanceworks forums...
Originally Posted by PJ Prendergast
i went to a scrapyard in Kilcock today looking for my 180sx tail lights, no luck though
...and then I wondered why I was on Stanceworks forums...
No engine harness sorry
__________________
...and then I wondered why I was on Stanceworks forums...
Originally Posted by PJ Prendergast
i went to a scrapyard in Kilcock today looking for my 180sx tail lights, no luck though
...and then I wondered why I was on Stanceworks forums...