FS/WTT: RB26dett w/S372R Turbo
Drunken posting pwns me..
Thread Starter
Join Date: Mar 2007
Posts: 184
Likes: 0
Received 0 Likes
on
0 Posts
FS/WTT: RB26dett w/S372R Turbo
I have had this for a few years slowly putting the RB26 together and now that its almost done i think i will just sell it all. the brackets and drive shaft that it comes with are ready to drop straight into a S13 240, and just minor modifications to drop it into pretty much anything ya want. on the setup i was building it for should make easy over 600hp or more depending on what you want to do. it comes with all factory parts such as A/c starter alternator etc. if i miss something or forget to put it in the add just ask me im sure i have it in the million boxes of RB stuff i have. if you buy this all you need to have a running car is turbo manifold, N1 oil pump gear, Turbo wastegate, ECU, and head gasket.
Bottom End
Crankshaft pollished and balanced-$600
ACL main bearing-$120
ACL Rod Bearing-$60
OEM Pistons
New rings-$130
OEM Rods
ARP Rod bolts-$125
ARP Main bolts -$190
N1 Oil Pump housing (needs Gear)-$150
ATI Harmonic Balancer (also have OEM for those who want A/C)-$550
Custom RWD converted RB26 OIL Pan-$300
Engine Head
ARP Head Studs-$300
Tomie Cam Gears-$390
HKS Pop Cams-$550
Supertech Valve springs-$450
Drive Train
All Custom Tranny/Engine mounts-$350
One Piece Custom Steel Driveshaft Rated for 1000+hp-$400
Big RB25 Rwd Trans-$800
Exedy NISMO Triple Disc Clutch-$1700
Rb25 Slave cylinder-$170
Exteranl Engine Parts
Bulls Eye S372R-$950
Splitfire Ignition Coils-$600
Polished intake plenum-$250
Greddy 850cc injectors-$750
HKS Fuel Rail-$350
Rb26 ITB Polished MAP sensor Rail-$150
Aeromotive A1000 w/filter (I bought this and have never used it so may need rebuild)-$160
Greddy Timing Belt-$170
HKS BOV-$400
all steel braided turbo oil and coolant lines with an fittings-$350
XS Power 4row Intercooler (i made over 600hp on this intercooler no issues)-$300
plenty of extra intercooler piping and Tbolts
two downpipes one for 4bolt one for vband
Full wiring harness included-$250
tons of extra parts
I think thats it like i said its just been sitting in my storage unit and ive been peicing it together. I have the bottom end at a machine shop now getting assembled. Sorry for my bad pictures ahead of time, I am hoping to get somewhere around $8k OBO for it all or $7kOBO with out the turbo, and that include the bottom end fully assembled. i would put the engine all back together if ya bought the gaskets, i put prices next to eat item to show what these parts used sell for, so shoot me offers if your interest in buying or have something to trade. PM if your interested.
Bottom End
Crankshaft pollished and balanced-$600
ACL main bearing-$120
ACL Rod Bearing-$60
OEM Pistons
New rings-$130
OEM Rods
ARP Rod bolts-$125
ARP Main bolts -$190
N1 Oil Pump housing (needs Gear)-$150
ATI Harmonic Balancer (also have OEM for those who want A/C)-$550
Custom RWD converted RB26 OIL Pan-$300
Engine Head
ARP Head Studs-$300
Tomie Cam Gears-$390
HKS Pop Cams-$550
Supertech Valve springs-$450
Drive Train
All Custom Tranny/Engine mounts-$350
One Piece Custom Steel Driveshaft Rated for 1000+hp-$400
Big RB25 Rwd Trans-$800
Exedy NISMO Triple Disc Clutch-$1700
Rb25 Slave cylinder-$170
Exteranl Engine Parts
Bulls Eye S372R-$950
Splitfire Ignition Coils-$600
Polished intake plenum-$250
Greddy 850cc injectors-$750
HKS Fuel Rail-$350
Rb26 ITB Polished MAP sensor Rail-$150
Aeromotive A1000 w/filter (I bought this and have never used it so may need rebuild)-$160
Greddy Timing Belt-$170
HKS BOV-$400
all steel braided turbo oil and coolant lines with an fittings-$350
XS Power 4row Intercooler (i made over 600hp on this intercooler no issues)-$300
plenty of extra intercooler piping and Tbolts
two downpipes one for 4bolt one for vband
Full wiring harness included-$250
tons of extra parts
I think thats it like i said its just been sitting in my storage unit and ive been peicing it together. I have the bottom end at a machine shop now getting assembled. Sorry for my bad pictures ahead of time, I am hoping to get somewhere around $8k OBO for it all or $7kOBO with out the turbo, and that include the bottom end fully assembled. i would put the engine all back together if ya bought the gaskets, i put prices next to eat item to show what these parts used sell for, so shoot me offers if your interest in buying or have something to trade. PM if your interested.
__________________
-Xavier-
-Xavier-
Last edited by XMasta19; 08-23-2012 at 09:08 PM.
if you had it together n showed to run id trade my built s15 sr havent ran it yet waiting for intercooler piping to be done n dyno
__________________
nissan/infiniti is the best who cares about the rest
nissan/infiniti is the best who cares about the rest
Drunken posting pwns me..
Thread Starter
Join Date: Mar 2007
Posts: 184
Likes: 0
Received 0 Likes
on
0 Posts
Ya i know ill have pics on a week of the bottom end back together and maybe buy a head gasket and put it in the car and sell it then well see its not that much work.
__________________
-Xavier-
-Xavier-
Text me i will buy the block , head and Timing belt ... 813-390-4703
__________________
Glenngieering [/URL]
"AEM Speed Density Proper Real time Tuning Specialist"..... I DO NOT TUNE ROM/MAF SYSTEMS ! Glenngineering
Glenngieering [/URL]
"AEM Speed Density Proper Real time Tuning Specialist"..... I DO NOT TUNE ROM/MAF SYSTEMS ! Glenngineering
Thread
Thread Starter
Forum
Replies
Last Post
XMasta19
Misc Automotive For Sale/WTB
2
04-11-2012 11:45 AM
ihaterice
For Sale/WTB Honda & Acura
28
12-04-2009 11:22 AM
DETriment
Misc Automotive For Sale/WTB
3
01-06-2008 06:19 PM