Sr20det for sale look here

Reply Subscribe

Thread Tools

Mar 24, 2012 | 07:51 AM

#1 (permalink)

S13 hatch

Thread Starter

Registered User

Joined: Jun 2007

Posts: 854

Likes: 0

Sr20det for sale look here

So heres the story I had a search for a motor a a car so i can use on the track with and had a lot of plans with and so this thing was posted everywhere i had seen ppl vouch for it, I thought i was a legit motor. So once i got the ecu tuned by martin and bought all this aftermarket stuff to put on this motor this is how the motor looked

then after a few weeks got all the parts together and in properly, and believe me i took the time to do everything right and then at the end after i got it all started it ran i three cylinders, after trouble shooting i brought my injectors tested flowed at boost lab, troubleshooting the injector, coilpack and harness. I stopped the car and finally compression tested and got these numbers 100,150, 0, and 145. Then I take everything apart and here is what I truely got... a grimy bastard that sold me a melted piston on #3 so I just wanted all of you guys to know about him, His name is Mike, He works at Toyota in tampa, He says that he is well experienced in building, and he also stated that he would help me build the motor again if he gave me money. That bastard even had the nerve to argue with me on the phone talking about i ran rich on the motor so the rings didn't seat in, that def is some bullshit well now i have his shit on blast so you guys know what he is Capable of. People like this shouldnt be selling shit on here because he is giving it a bad name, I am an honest and reliable selling so I hate to see shit happen like this He just got to my nerves so here are the pictures!

HIS NAME IS DRIFT_JUNKII on TR so BE AWARE!!!!!!!

After pictures of taking it apart

cylinder head:
-stock camshafts
-tomei cam gears
-3 angle valve job
-new jim wolf valve guides
-bc stainless valves intake and exhaust
-bc valve springs and retainers
-cometic head gasket
-stock cas
-new oem nitron valve seals
-freshly resurfaced
-new timing chain
-new guides
-new tensioner
-isis top mount manifold
-turbonetics t3t4 60-1 .70ar compressor .63ar exhaust
-new exhaust gasket
-new intake gasket
-isis intake manifold
-550cc fiveo injectors
-external emusa wastegate
-custom screamer pipe
-custom 3in 5 bolt turbo elbow
-titek polished coil pack cover
-new set or bkr7e plugs

cylinder block:
-freshly decked
-freshly honed
-stock pistons 79e
-cryotreated connecting rods
-new acl race bearings (.001-.0015 clearence)
-new acl race main bearings(.001-.0015 oil clearence)
-micropolished stock crankshaft
-arp head studs
-arp main studs
-isis oil pan
-rotating assembly freshly balanced, got printout to prove it.
-dayco drive belts
-custom -8an lines for powersteering pump
-stainless steel braided line to powersteering rack
-z32 maf w/harness
-greddy type s bov
-circuit sports radiator fill
-polished coolant over flow catch can

drive train:
-oem exedy replacment clutch
-freshly resurfaced flywheel
-stock sr20det transmission
-stock shifter
-85w 90 gear oil changed about 500 miles ago
-new tail shaft seal
-new rear main seal

extra misc.:
-lower crankcase or upper oil pan, same thing
-set of 86f pistons
-stock connecting rods
-set of injector o rings
-misc intercooler piping
-misc couplers
-misc t bolt clamps
-custom fabricated v mount intercooler
-custom fabricated cx racing radiator

there may be a few things im missing, but thats most of it. reason im selling is cause i have bills to catch up with and i have better plans for my s chassis. my asking price is 3000 obo. I'm somewhat flexible, but don't insult me. Thats a reasonable price for 450-500hp capability. Please feel free to ask any questions.

now comes with a 3in full exhaustS

Last edited by S13 hatch; Mar 24, 2012 at 08:37 AM.