FS: Fresh KA Stuff, Turbo's, Tuning Software, Intercooler, HKS SSQV, Gauges
Thread Starter
Registered User
Joined: Aug 2008
Posts: 391
Likes: 0
FS: Fresh KA Stuff, Turbo's, Tuning Software, Intercooler, HKS SSQV, Gauges
KA24DE Parts
Fresh ka block with all machine work done (still stock bore) Honed and decked-$200
Crank was checked and is perfect, never a rod knock or anything-$150
Comes with brand new Clevite Rod and Main bearings oem size-$60 for each or $100 both
Fresh head from the machine shop, had a 3 angle valve job, new valve stem seals, bc springs and retainers and bc 264 Cams-SOLD
new ka-t tubular stainless manifold for T25/T28-$50
Tapped oil pan for turbo drain-$20
Steel braided oil feed line, all the an fittings, and oil drain line-$30
New full rebuild kit with all gaskets-$50
Holset HX35 Turbo, Good for up to 500hp easily, Twin Scroll, No shaft play, internal wastegate was blocked off, has the standard 5 bolt exhaust flange but comes with the v band adapter plate-SOLD
SR T25 with blown oil seals and has some shaftplay-$15
AEM FIC, New in box, Gives you timing adjustibility so it's way better than a standard piggy back-SOLD
Used no name front mount, 31x12x3, has the middle tab on top that you need to mount on 240's-SOLD
Used but working HKS SSQV BOV- SOLD
Prosport Smoked lens boost/vacuum gauge-$15
I also have one hatch that I am parting out. not much for suspension left and no motor or trans. All parts are obo
And I have one rolling Hatch shell that has a half cage, no motor or trans as well-SOLD
Also have s13 ac lines that the ends were cut and rewelded for sr. I'm including all the lines and the condenser-$100
Call or Text for more info or offers 352 206 1366
Fresh ka block with all machine work done (still stock bore) Honed and decked-$200
Crank was checked and is perfect, never a rod knock or anything-$150
Comes with brand new Clevite Rod and Main bearings oem size-$60 for each or $100 both
Fresh head from the machine shop, had a 3 angle valve job, new valve stem seals, bc springs and retainers and bc 264 Cams-SOLD
new ka-t tubular stainless manifold for T25/T28-$50
Tapped oil pan for turbo drain-$20
Steel braided oil feed line, all the an fittings, and oil drain line-$30
New full rebuild kit with all gaskets-$50
Holset HX35 Turbo, Good for up to 500hp easily, Twin Scroll, No shaft play, internal wastegate was blocked off, has the standard 5 bolt exhaust flange but comes with the v band adapter plate-SOLD
SR T25 with blown oil seals and has some shaftplay-$15
AEM FIC, New in box, Gives you timing adjustibility so it's way better than a standard piggy back-SOLD
Used no name front mount, 31x12x3, has the middle tab on top that you need to mount on 240's-SOLD
Used but working HKS SSQV BOV- SOLD
Prosport Smoked lens boost/vacuum gauge-$15
I also have one hatch that I am parting out. not much for suspension left and no motor or trans. All parts are obo
And I have one rolling Hatch shell that has a half cage, no motor or trans as well-SOLD
Also have s13 ac lines that the ends were cut and rewelded for sr. I'm including all the lines and the condenser-$100
Call or Text for more info or offers 352 206 1366
__________________
Last edited by 2 to the 40 oz; Jun 17, 2011 at 06:04 AM.
I <3 JDM
Joined: Jul 2010
Posts: 52
Likes: 0
T25
you still have the t25 blown i buy blown turbos and rebuld them PM!!!
__________________
|------------------------------------| ||
|....Overnight Parts From Japan....||'|";,__
|_..._...______________======| |_|_|...,]
"(@)'(@)''''''''''''''''''''''' '''''''''*|(@)(@)** **"(@)
|------------------------------------| ||
|....Overnight Parts From Japan....||'|";,__
|_..._...______________======| |_|_|...,]
"(@)'(@)''''''''''''''''''''''' '''''''''*|(@)(@)** **"(@)
Thread Starter
Registered User
Joined: Aug 2008
Posts: 391
Likes: 0
