Dual Cam parts

interior main harness full uncut mint $50
Main engine bay harness uncut mint $30
3 engine harness', two were used for sr swap so chasis harness and dash plugs were cut but I have some you could wire back on, one is pretty much uncut minus like the egr plugs. $25 a piece for the cut ones and $40 for the uncut

5spd parts

clutch pedal and brake pedal $30 for both
lower harness $30
sr stock flywheel needs resurface $10

Front and rear subframes $25 each
All stock arms front and rear $3 a piece
Hatch with no rust but tons of holes from people putting stupid ricer wings but clean glass $10
Hatch glass(just the glass)$10
diff $30 has a hicas cover but I can't guarantee it is a hicas diff
6 bolt axles $20 a pair.
Have all the 4 lug hubs $10 a piece

No I don't have any engines
2 S13 SR transmissions that I got when I ordered my swap but never used because they didn't work properly, one would go into gear but randomly lock up, other is stuck in nuetral. But its probably a semi easy fix or you could just use the bellhousing with a ka trans $40 each
blown sr trans with ka bellhousing. make an offer if you want it(but doubt anyone does)

Coupe/Hatch doors minor dents all come with glass-$15 a door
Complete dual cam front, single cam fenders, oem hood, and bumper was cut for fmic. Pretty clean for the most part- make offers on what you want
black manual door panels, no fabric and were cut for 6x9 speakers(looks good though) speakers come with them $30 for both
Black power door panel, has fabric, Decently clean-$10
I have all the brake lines, calipers, rotors, booster, master, e brake. Just make an offer if you want anything
Ka24de ac Bracket, I have 2-$10 each
ka timing cover, oil pan-$5 each
glove box-$5
black center console-$5
power window switches-$5 for both
all the main fuses in the engine bay-$1 for the 30amp and $3 for the main 75amp
ka coil-$5
All the under dash AC stuff-$10 for everything
Blacked out stock tails-$10



Probably have more that I can't think of right now. Text or call anytime 813 713 7946

 

bump for my buddy sean

 

Does the driver side front control arm have good bushing and ball joint?

 

I don't know because I haven't taken it apart yet. I should be dissabmling on sunday

 

Do you have the center console piece that goes around thr ccm radio and shifter?

 

Not any in perfect shape. Sorry

 

I'll take the 5 Spd brake pedal. Text me ur location

 

North of Tampa in Dade City, but I do go to Tampa and Brandon pretty often. Shoot me a text 813 713 7946

 

What condition is it in?

 

Send me a text and I can get you some pictures of what I have